Diagnosis and Information System (DIS)
WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove equipment wall.
- Remove spark plug from 8th cylinder.
(Without removing manifold).
- Connect DIS Tester.
- Connect charger.
Test:
- Call up Diagnosis
- Select vehicle > right arrow button
- Function selection
- Complete vehicle
- Drive
- Engine management
- Valve gear
- Valvetronic variable valve gear
- Mechanical components/function
- Test schedule > right arrow button
- Compression pressure check > right arrow button
- Follow DIS Tester instructions.
NOTE:
Clear fault memory
A mechanical compression pressure check is not possible.
A mechanical compression pressure check is not possible.