11 8 650 Holder

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For removing and installing oil pump drive ring gear.

Engine: N53, N54

SI number: 1 20 06 (299)

Order number: 11 8 650

Holder

Fig 1: Identifying Holder (11 8 650)

Courtesy of BMW OF NORTH AMERICA, INC.