11 8 530 Removal and Installation Tool
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
Note: For removing and installing sealing cap on vacuum pump.
Engine: N53, N54
SI number: 1 20 06 (299)
Order number: 11 8 530
Removal and installation tool
Consisting of:
1 = 11 8 531: Baseplate
2 = 11 8 532: Pressure plate
3 = 11 8 533: Spindle (pressure plate)
4 = 11 8 534: Spindle (removal plate)
5 = 11 8 535: Set of M10 screws (N54)
6 = 11 8 536: Set of M11 screws incl. sleeve (N53)
7 = 11 8 537: Removal plate