11 8 180 Holder

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: Blocking flywheel when releasing and tightening down central bolts on vibration damper

Engine: M47T2, M47TU, M57T2, M57TU, M67, N51, N52, N53, N54, W17

SI number: 1 12 99 (452)

Order number: 11 8 180

Holder

Fig 1: Identifying Holder (11 8 180)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 11 8 181: Basic body (not shown)

Note: E65/M67, E38/M67 Omitted: replaced by 11 8 183

2 = 11 8 182: Locking piece

3 = 11 8 183: Basic body

4 = 11 8 184: Adapter

Note: E65/M67

5 = 11 8 185: Adapter with setting sleeve

Note: E46 M47TU