LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (DISC - 745i, 745Li, 760i & 760Li) >> Testing >> Parking Brake

Parking Brake

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2005 BMW 760i, 2005 BMW 760Li, 2005 BMW 745i, 2005 BMW 745Li, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Parking brake test must be carried out on roller dynamometer.
  1. Release position (engine off/ignition on). Wheel circumferential force at right and left should be at least 67 lb. force (300 N).
  2. Press parking brake button (engine off/ignition on). Vehicle must be pulled uniformly out of brake roller or drive of brake roller is deactivated on both sides.
scientia non olet · About LEMON Manuals