31 3 350 Spring Holder
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
In conjunction with: 31 3 340 and 31 3 360
NOTE:
For locating coil springs during tensioning. No. 31 3 350 reserved for consecutive sub-number spring tensioner 31 3 340.
Series: E31, E36, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56
Storage location: Single
SI number: 1 11 99 (438)
Order number: 31 3 350
Spring holder
Consisting of:
1 = 31 3 351 Spring retainer (2 x)
NOTE:
For use only with repair instructions
2 = 31 3 352 Spring retainer (2 x)
NOTE:
For use only with repair instructions
3 = 31 3 353 Spring retainer (2 x)
NOTE:
For use only with repair instructions
4 = 31 3 354 Spring retainer ring
NOTE:
For use only with repair instructions
5 = 31 3 355 Spring retainer
NOTE:
For use only with repair instructions
6 = 31 3 356 Centering ring
NOTE:
For use only with repair instructions
7 = 31 3 357 Spring retainer (2 x)
NOTE:
For use only with repair instructions.
In conjunction with: 31 3 340
8 = 31 3 381 Spring retainer ring
NOTE:
For use only with repair instructions.
9 = 31 3 382 Spring retainer
NOTE:
For use only with repair instructions.
10 = 31 3 358 Insert ring
NOTE:
For use only with repair instructions. For insertion in spring retainer ring 31 3 354. Model series: E87
11 = 31 3 383 Spring retainer
NOTE:
To be used with repair instructions only.