24 32 Governor
WARNING: This page is about a different car, the 2007 BMW 530xi, 2007 BMW 525xi, 2006 BMW 530xi, and 2006 BMW 525xi. However, it is still accessible from the selected car via links, so may be relevant.
GOVERNOR TIGHTENING SPECIFICATION
| Application | Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|---|
| 1AZ | Governor flange to transmission | A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | M8 | - | 16 Nm |
| 2AZ | Threaded pin to centrifugal governor | A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | - | 3 Nm |
| 3AZ | Hexagon nut to threaded pin | A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | - | - | 10 Nm |
| 4AZ | Hexagon head screw on centrifugal governor | A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | - | 11 Nm |
| 5AZ | Governor housing to hub | 4HP-22H | M6 | - | 11 Nm |