24 21 Input, Intermediate And Output Shafts
WARNING: This page is about a different car, the 2007 BMW 530xi, 2007 BMW 525xi, 2006 BMW 530xi, and 2006 BMW 525xi. However, it is still accessible from the selected car via links, so may be relevant.
INPUT, INTERMEDIATE AND OUTPUT SHAFTS TIGHTENING SPECIFICATION
| Application | Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|---|
| 1AZ | Flange nut, output flange | A5S 300J | - | - | 225 Nm |
| Flange nut, output flange without spring washer | A5S 360R | - | - | 30 Nm | |
| Flange nut, output flange, with spring washer | A5S 360R / A5S 390R / A4S 200R | - | - | 60 Nm | |
| - | A4S 270R / A4S 310R | - | - | 100 Nm | |