64 52 A/C compressor
WARNING: This page is about a different car, the 2008 BMW 750i, 2007 BMW 750i, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - A/C COMPRESSOR
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Refrigerant lines to A/C compressor | E36/7 M54, E36/7 S54, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | M8 | - | 20 Nm |
| 2AZ Filler plug, A/C compressor | E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | - | - | 30±1 Nm |
| 3AZ A/C compressor to carrier | M54, N62, S85, N54 | M8 | - | 21 Nm |
| - | N45, N46, M47T2, M57TU, M57T2 | M8 | - | 19 Nm |
| - | N52 | M8 x 87 | Replace aluminum screw/bolt | - |
| - | - | - | Jointing torque | 10 Nm |
| - | - | - | Torque angle | 180±15° |
| - | - | E85 S54, E86 S54 | - | 20 Nm |
| 4AZ Belt pulley/hub to A/C compressor | M47T2 | - | - | 35±5 Nm |
| 5AZ Bracket, A/C compressor to lower crankcase | N54 | - | - | 19 Nm |
| 6AZ Cable holder to A/C compressor | M47T2 | - | - | 3 Nm |