51 11 Front Bumper
WARNING: This page is about a different car, the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, and 2007 BMW 750Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT BUMPER
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Bumper to bracket | E32 | M6 | - | 9 Nm |
| - | E36 | M8 | - | 22 Nm |
| - | E34 | M10 | - | 43 Nm |
| 2AZ Bumper and bracket to impact absorber | E31 | M10 | Install bolts with bolt cement. | 22 Nm |
| - | E38/E39/E46 | M10 | - | 41 Nm |
| - | E36 | M10 | Install bolts with bolt cement. | 55 Nm |
| - | E32/E34/E30/Mod. 88 | M12 | - | 48 Nm |
| - | E52 | - | - | 38 Nm |
| 3AZ Impact absorber/bracket to body | E30/E24 | - | - | 23 Nm |
| - | E31/E32/E34/E36/E38/E39 | M6 | - | 9 Nm |
| - | E32/E34 | M10 | - | 48 Nm |
| - | E46/E52 | M8 | - | 20 Nm |
| 4AZ Carrier to body | E46/E65/E66/E67 | M8 | - | 18 Nm |
| - | E60/E61/E63/E64 | M8 | - | 21 Nm |
| 5AZ Carrier to deformation element | E85/E86 | M10 | - | 38 Nm |
| - | E85/E86 | M6 | - | 8 Nm |
| - | E83 | M8 | - | 28 Nm |
| 6AZ Deformation element to body | E85/E86 | M8 | - | 19 Nm |
| - | E83 | M8 | - | 25 Nm |
| 7AZ License plate to bumper | E46/E60/E61/E63/E64/E65/E66 | - | - | 1 Nm |
| 8AZ License plate to bumper (thread repair) | E46/E60/E61/E63/E64/E65/E66 | M5 | - | 4.5 Nm |
| 9AZ Bumper to front end | E60/E61 | - | - | 5 Nm |