33 33 Rear Axle Suspension
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR AXLE SUSPENSION
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Rubber mount to rear axle carrier | E21, E23 | - | - | 95 Nm |
| - | E21, E24, E28 | - | - | 40 Nm |
| 2AZ Stud to body | E36 | - | - | 120 Nm |
| - | E36/Z3/Compact | - | - | 127 Nm |
| - | E46, E85, E86 | - | - | 90 Nm |
| 3AZ Rear axle carrier with rubber mounts to body | E36, E46, E83, E85, E86 | M12 x 1.5 | - | 77 Nm |
| - | E36 | M14 x 1.5 | - | 140 Nm |
| - | E38 | - | - | 127 Nm |
| - | E39, E52, E53 | - | - | 163 Nm |
| - | E60, E61, E63, E64, E65, E66, E67 | - | - | 165 Nm |
| 4AZ Rear rubber mount to body | E32, E34 | M10 | Thread free from oil and grease Secure with Loctite No. 270 |
45 Nm |
| 5AZ Rear axle carrier to rear rubber mount | E32, E34 | M12 | - | 77 Nm |
| 6AZ Fixing, rubber mount/rear axle carrier, front | E67 | - | - | 8 Nm |