LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1251 (Cooling System - Tightening Torques) >> 11 Engine Radiator With Attachment >> 17 11 Radiator and Mounting Parts

17 11 Radiator and Mounting Parts

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - RADIATOR AND MOUNTING PARTS

- Type Thread Tightening specification Measure
1AZ Radiator to body - - - -
self-tapping screw All B6.3 - 9 Nm
- All M6 - 10 Nm
2AZ Drain plug to radiator All - - 2.5 Nm
3AZ Temperature switch to radiator (91°C/99°C) max. All - - 15 Nm
4AZ Expansion tank to body All - - 9 Nm
- M57TU/E65 - - 4 Nm
5AZ Radiator on module carrier E46 - - 4 + 1 Nm
6AZ Retaining plate, expansion tank, to radiator E46 - - 4 + 1 Nm
7AZ Fan cowl on radiator E46 - - 4 + 1 Nm
8AZ Plug in radiator (temperature switch omitted) E36/7/M54 M14 x 1.5 - 15 Nm
9AZ Mounting plate to radiator M57TU/E65 - - 4.5 Nm
10AZ Radiator bracket All - - 2.5 Nm