24 21 Input, Intermediate and Output Shafts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - INPUT, INTERMEDIATE AND OUTPUT SHAFTS
| - | Type | Measure |
|---|---|---|
| 1AZ Flange nut, output flange | A5S 300J | 225 Nm |
| Flange nut, output flange without spring washer | A5S 360R | 30 Nm |
| Flange nut, output flange, with spring washer | A5S 360R/A5S 390R/A4S 200R | 60 Nm |
| - | A4S 270R/A4S 310R | 100 Nm |