65 77 690 Removing and Installing/Replacing Central Gateway Module (Up To Build Date 03/2004)

WARNING: This page is about a different car, the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, and 2007 BMW 750Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove safety information module. See 65 77 700 REMOVING AND INSTALLING (REPLACING) SAFETY INFORMATION MODULE

NOTE: Follow instructions for handling optical fibers . See 61 00 ... NOTES ON HANDLING OPTICAL FIBERS

After installation:

Carry out coding/programming.

Fig 1: Identifying DIS

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock catch (1) in direction of arrow.

Pull central gateway module (2) out of control unit carrier (3) slightly.

Disconnect plug connections (4).

Remove central gateway module (2).

Fig 2: Unlocking Catch

Courtesy of BMW OF NORTH AMERICA, INC.