65 77 635 Replacing Sensor Mat For Left Or Right Rear Seat Occupancy Detector (Comfort Seat)
WARNING: This page is about a different car, the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, and 2007 BMW 750Li. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove seat cover for rear seat See 52 25 405 REPLACING SEAT COVER FOR LEFT OR RIGHT REAR SEAT
Remove sensor mat (1) from padding (2).
IMPORTANT:
To avoid malfunctions, make sure sensor mat (1) is cleanly laid:
- Lay plug-in connection in designated recess.
- Lay sensor mat (1) straight and without kinks (large bending radii).
- If necessary, secure sensor mat (1) with adhesive tape provided.
- Feed sensor mat (1) in areas of transition (e.g. seat cushion to side section) cleanly into penetrations of padding (1).