65 77 565 Removing and Installing/Replacing Control Electronics For Rear Seat Occupancy Detector (Left Or Right)

WARNING: This page is about a different car, the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, and 2007 BMW 750Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear seat. See 52 24 005 REMOVING AND INSTALLING/REPLACING REAR SEAT (NORMAL)

Detach retainers (1) on rear seat (2).

Turn up seat cover (3) in direction of arrow slightly.

Fig 1: Turning Up Seat Cover In direction Of Arrow

Courtesy of BMW OF NORTH AMERICA, INC.

Raise seat upholstery section (1) slightly.

Disconnect plug connections (2).

Detach control electronics for rear seat occupancy detector (3) from felt (4) and remove.

Fig 2: Identifying Upholstery Section, Plug Connection & Seat Occupancy Detector

Courtesy of BMW OF NORTH AMERICA, INC.