65 75 071 Removing and Installing (Replacing) Module For Passenger Compartment Sensor

WARNING: This page is about a different car, the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, and 2007 BMW 750Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove make-up mirror and front console insert. See 51 44 180 REMOVING AND INSTALLING/REPLACING REAR CONSOLE INSERT/MAKE-UP MIRROR IN REAR COMPARTMENT

Open detent lugs (1) in direction of arrow and remove module for passenger compartment sensor (2) from front console insert (3).

Fig 1: Open Detent Lugs (1) In Direction Of Arrow

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming
Coding
Car & Key Memory
CD "CIP"

Fig 2: Identifying DIS
Courtesy of BMW OF NORTH AMERICA, INC.