64 53 518 Replacing Desiccant Insert For A/C System (Condenser Removed)
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant R 134a. See 64 50 ... INSTRUCTIONS FOR HANDLING REFRIGERANT R 134A and 64 50 ... SAFETY INSTRUCTIONS FOR HANDLING REFRIGERANT R134A
Follow safety instructions for handling refrigerant oil. See 64 50 ... INSTRUCTIONS FOR HANDLING REFRIGERANT R 134A
Risk of damage!
Restart engine only when A/C system has been correctly filled.
Follow instructions for opening and replacing parts in refrigerant circuit! See 64 52 ... INSTRUCTIONS FOR OPENING AND REPLACING PARTS IN REFRIGERANT CIRCUIT
If A/C system is opened for more than 24 hours:
Replacing drier insert for A/C system
Remove protective cap (1) from condenser for A/C system (2).
Press sealing cap (1) inwards and remove circlip (2).
Remove protective cap (2) from condenser for A/C system (3) with aid of an inserted screw (1).
Installation:
Replace sealing rings (1) of sealing cap (2) and coat with suitable refrigerant oil.
Remove desiccant insert for A/C system (1) in direction of arrow from condenser for A/C system (2).
After installation:
- Evacuate and fill A/C system See 64 50 009 DRAWING OFF, EVACUATING AND FILLING A/C SYSTEM (R 134A)