64 11 842 Replacing Servodrive For Right Footwell Flap (Automatic A/C High)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove function carrier on trim for instrument panel. See 51 16 170 REMOVING AND INSTALLING FUNCTION CARRIER ON PANEL FOR INSTRUMENT PANEL

Unclip cover (1) at both retaining hooks (2) and remove in direction of arrow.

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip both linkages (2) in direction of arrow.

Release screws (1).

Pull back holder (3) in direction of arrow and invert.

Fig 2: Removing Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Press lock (2) and unclip servodrive (3) in direction of arrow.

NOTE: If necessary, align shaft of flap(s) to be actuated to position of servodrive to be installed.

Fig 3: Removing Servodrive

Courtesy of BMW OF NORTH AMERICA, INC.