64 11 816 Replacing Servodrive For Left Cold Air Duct (Automatic A/C High)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove function carrier on trim for instrument carrier. See 51 16 170 REMOVING AND INSTALLING FUNCTION CARRIER ON PANEL FOR INSTRUMENT PANEL
Press lock (1) and unclip servodrive (2) in direction of arrow.
Disconnect plug connection (3) and remove servodrive (2).
Installation:
If necessary, align shaft of flap(s) to be actuated to position of servodrive to be installed.