63 25 000 Removing And Installing/Replacing Additional Stop Light

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Lever out catches (1) of ventilation louver for oddments tray (2).

Fold up complete ventilation louver for oddments tray (2) in direction of arrow, disconnect plug connection underneath and remove complete ventilation louver for oddments tray (2) towards front.

Fig 1: Identifying Trim Threads

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure ventilation louver for oddments tray is correctly fed:

into mounts for oddments tray (1)
into positions (2) of oddments tray (3)

Fig 2: Identifying Special Tool (00 9 317)
Courtesy of BMW OF NORTH AMERICA, INC.

Unclip additional stop light (1) in direction of arrow from ventilation louver for oddments tray (2) and remove.

Installation:

Make sure additional stop light (1) is correctly engaged in ventilation louver for oddments tray (2).

Fig 3: Identifying Stop Light And Oddments Tray

Courtesy of BMW OF NORTH AMERICA, INC.