63 21 310 Replacing Circuit Board For Left Or Right Rear Light (Up To 03/2005) (On Rear Lid)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

REMOVE REAR LIGHT

Detach sealing frame for rear light (1) in direction of arrow.

Release screws (2).

Remove cover cap of rear light (4) from rear light (3).

Fig 1: Identifying Cable Tie And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure seal (1) is correctly seated in cover cap of rear light (2).

Fig 2: Identifying Backrest Cover Retaining Points

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1).

Release screws (2).

Remove circuit board for rear light (3) from rear light (4).

Fig 3: Identifying Backrest Cover With Padding

Courtesy of BMW OF NORTH AMERICA, INC.