63 12 870 Replacing Ignition Unit For Left Xenon Headlight (From 03/2005)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Version with xenon headlights: Danger to life due to high voltage! Therefore disconnect all components from voltage supply before removal.

Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.

Necessary preliminary tasks:

M67, N52, N62, N73 only

Remove left intake filter housing

IMPORTANT:

Ignition unit and xenon bulb are viewed as a single component and must not be separated!

NOTE:

Headlight removed for purposes of clarity.

Unlock catch (1) and remove high beam cover cap (2) in direction of arrow.

Fig 1: Removing High Beam Cover Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (2).

Turn ignition unit for xenon headlight (1) approx. 30 ° counterclockwise and remove.

Fig 2: Turning Ignition Unit For Xenon Headlight

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock retainer (1).

Remove bulb holder (3) from ignition unit (2) in direction of arrow.

Fig 3: Removing Bulb Holder From Ignition Unit

Courtesy of BMW OF NORTH AMERICA, INC.