61 31 016 Removing And Installing/Replacing Turn Indicator/Dimmer Stalk

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front section of steering column cover . See 32 31 010 REMOVING AND INSTALLING/REPLACING FRONT SECTION OF STEERING COLUMN COVER .

Release screws (1).

Remove indicator/dimmer stalk (2) in direction of arrow.

Fig 1: Identifying Indicator/Dimmer Stalk And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seat turn signal/dimmer stalk (2) with integrated pin housing (1) exactly in fixture for steering column control.

Fig 2: Identifying Turn Signal/Dimmer Stalk And Integrated Pin Housing

Courtesy of BMW OF NORTH AMERICA, INC.