LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1236 (General Electrical System - Repair) >> 21 Battery-Vapour Separate >> 61 21 010 Removing And Installing Battery

61 21 010 Removing And Installing Battery

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe safety instructions  for handling vehicle battery. See 61 00 ... SAFETY INSTRUCTIONS FOR HANDLING VEHICLE BATTERY .

Necessary preliminary tasks: 

Unscrew nut (1).

Tightening torque 61 21 1AZ.  See GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUES .

IMPORTANT: Do not under any circumstances pull/lever safety battery terminal off by force.

Detach safety battery terminal (2) towards top, lay to one side and secure.

Fig 1: Identifying Safety Battery Terminal And Nut
G04768411Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (2) and remove bracket (1).

Detach vent hose from battery.

Pull out battery.

Installation: 

Make sure battery is correctly seated in mounting.

Fig 2: Identifying Screw And Remove Bracket
G04768538Courtesy of BMW OF NORTH AMERICA, INC.