54 12 ... Replacing Complete Seal For Glass Slide/Tilt Sunroof (Frame)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove complete GLASS SLIDE/TILT SUNROOF (FRAME)
Mark one end point (marker pen on outside).
Detach seal (1) from sunroof (2).
Installation:
Start fitting new seal on marking.
Position seal gently only and align end points parallel to each other.
Press seal (1) firmly on frame (2) and ensure correct seating.