51 49 006 Removing And Installing/Replacing Trim For Rear Lid At Top

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

REMOVE TRIM FOR REAR LID AT BOTTOM .

Release screws (1 and 2).

Lever out retaining strap and remove tool box (3) in direction of arrow.

Fig 1: Removing Tool Box

Courtesy of BMW OF NORTH AMERICA, INC.

Release clips (1) and remove trim (2).

Fig 2: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of trim (3) must not be damaged or missing:

Clips
Clip mountings

Fig 3: Identifying Clip Mountings, Clips And Trim
Courtesy of BMW OF NORTH AMERICA, INC.