51 47 ... Removing And Installing/Replacing Rear Left Or Right Underbody Paneling

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Secure rear stowage lip (3) and rear underbody paneling (4) against falling out.

Release expansion nuts (1).

Release screws (2).

Remove rear stowage lip (3) and rear underbody paneling (4).

Installation:

Make sure rear underbody paneling (4) is correctly seated in underbody paneling.

Fig 1: Identifying Rear Stowage Lip, Underbody Paneling And Expansion Nuts

Courtesy of BMW OF NORTH AMERICA, INC.