51 37 000 Removing And Installing/Replacing Complete Rear Left Or Right Power Window Unit

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear DOOR WINDOW GLASS

Release screw (1).

Take off holder (2).

Release screws (4) and remove power window unit (3).

Tightening torque: 51 35 2AZ . See POWER WINDOWS, REAR for specs.

Fig 1: Identifying Power Window Unit And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1).

Detach flat motor (3) from power window unit (2).

Tightening torque: 51 35 1AZ . See POWER WINDOWS, REAR for specs.

Fig 2: Identifying Flat Motor And Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.