51 32 154 Adjusting Left Or Right Front Door Window Glass

Special tools required: 

• 61 2 071
• 61 2 210

Necessary preliminary tasks: 

• Remove DOOR BRAKE FOR FRONT DOOR 

Slacken screws (1 and 2) (do not release fully).

Retaining clip (3) remains fitted.

Fig 1: Identifying Retaining Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Screws (1) of power window rails at top must be tightened down.

Slacken screws (2) of door window (do not release fully).

Connect special tool 61 2 210  to plug connection (3) and special tool 61 2 071  . Connect special tool 61 2 071  to a 12 V power source.

Open door window approx. 100 mm and close again completely.

Fig 2: Identifying Plug Connection And Special Tool 61 2 071

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (2) of door window.

Tightening torque: 51 32 2AZ  . See FRONT DOOR WINDOWS for specs.

Using special tools 61 2 210  and 61 2 071  , open door window (1) to approx. 40 mm.

Tighten down screws (2).

Tightening torque: 51 33 2AZ  . See POWER WINDOWS, FRONT for specs.

Fig 3: Identifying Door Window, Special Tool 61 2 210 And 61 2 071

Courtesy of BMW OF NORTH AMERICA, INC.

Close door window (1) until screw (2) is accessible.

Tighten screw (2).

Tightening torque: 51 33 2AZ  . See POWER WINDOWS, FRONT for specs.

Close door window (1) completely.

Installation: 

INITIALIZE POWER WINDOW .

Fig 4: Identifying Door Window

Courtesy of BMW OF NORTH AMERICA, INC.