LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1233 (Body Equipment - Repair Instructions) >> 16 Mirrors/Covers/Ashtrays/Shelves/Trays >> 51 16 ... Removing And Installing Side Panels On Centre Console

51 16 ... Removing And Installing Side Panels On Centre Console

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Side panel on centre console, front: 

Release screw (1) on left/right.

Slide panel (2) on left/right in direction of arrow and remove.

Fig 1: Identifying Centre Console Panel Screw
G04775127Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Retainers (1) must be correctly seated in panel guides (2).

Fig 2: Identifying Retainers
G04775128Courtesy of BMW OF NORTH AMERICA, INC.

Side panel on centre console, rear: 

Slide panel (1) on left/right in direction of arrow and remove.

Fig 3: Sliding Panel On Centre Console
G04775129Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Retainers (1) must be correctly seated in panel guides (2).

Fig 4: Identifying Retainers
G04775130Courtesy of BMW OF NORTH AMERICA, INC.