51 14 000 Removing And Installing/Replacing Front BMW Badge

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 318

IMPORTANT:

Risk of damage!

To avoid damaging the paintwork on the engine hood/bonnet, tape off edge areas (1) to sides of guide pins.

So as not to subject the BMW badge to excessive deformation, lever out badge with special tool 00 9 318 at guide pins (2).

Fig 1: Identifying Special Tool 00 9 318

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of badge (1) must not be damaged or missing:

2 Guide pins

3 Grommets

Fig 2: Identifying Badge, Grommets And Guide Pins

Courtesy of BMW OF NORTH AMERICA, INC.