51 11 ... Removing And Installing/Replacing Cover For Headlight Washer System On Left

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove BODY MOULDING for bumper

Build date up to 03/2005:

Release screws (1).

Remove cover (2) towards top.

Fig 1: Identifying Cover For Headlight Washer System (Build Date Up To 03/2005)

Courtesy of BMW OF NORTH AMERICA, INC.

Build date from 03/2005 :

Release screws (1).

Remove cover (2) towards front.

Fig 2: Identifying Cover For Headlight Washer System (Build Date From 03/2005)

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Detach flap (1) sideways from bearing support (2).

Fig 3: Detaching Flap Sideways From Bearing Support

Courtesy of BMW OF NORTH AMERICA, INC.