LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1232 (Integrated Suspension Systems - Repair) >> 14 Electrical Components >> 37 14 017 Removing and Installing/Replacing Front Mounted Acceleration Sensor

37 14 017 Removing and Installing/Replacing Front Mounted Acceleration Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection)  . See 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)

Necessary preliminary tasks: 

Release screws (1).

Disconnect plug connection (2).

Remove front mounted acceleration sensor.

Fig 1: Identifying Plug Connection & Screw
G04767277Courtesy of BMW OF NORTH AMERICA, INC.