36 11 527 Removing And Installing/Replacing Rear Receiving Antenna For RDC

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Operations for removing and installing receiving antenna at rear left or right are identical.

Remove rear left or right wheel arch trim.

NOTE:

Holder with receiving antenna is detached by removal of wheel arch trim.

OBSERVE SAFETY INSTRUCTIONS ON RAISING THE VEHICLE .

Unlock plug (1) and disconnect.

Detach receiving antenna with fixture (2) from threaded pin (3).

Fig 1: Identifying Antenna With Fixture From Threaded Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock retaining lugs (1) and unclip receiving antenna (2).

Fig 2: Identifying Retaining Lugs And Receiving Antenna

Courtesy of BMW OF NORTH AMERICA, INC.