LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1230 (Wheel And Tires - Repair Instructions) >> 11 Disc Wheels (Rims) >> 36 11 503 RDC Resetting

36 11 503 RDC Resetting

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

RDC monitors the tyre inflation pressure in the four wheels.

Each tyre incorporates an electronic wheel circuit, which constantly monitors the tyre inflation pressure.

The system signals when the inflation pressure drops in one or more tyres.

Resetting must be carried out in each case immediately after tyre pressures have been corrected, after tyres/wheels have been replaced and after repairs to the air spring system.

Please refer to the relevant Owner's Handbook for details of the resetting procedure.