36 10 209 Checking Front And Rear Wheel For Face And Radial Runout

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

36 1 030

Necessary preliminary tasks:

Check wheel bearings

Lift vehicle.

Check wheel with special tool 36 1 030 (measuring fixture) for LATERAL RUNOUT .

Fig 1: Checking Wheel Lateral Runout Using Special Tool (36 1 030)

G04767180

Courtesy of BMW OF NORTH AMERICA, INC.

Check wheel with special tool 36 1 030 (measuring fixture) for RADIAL RUNOUT .

Fig 2: Checking Wheel Radial Runout Using Special Tool (36 1 030)

G04767181

Courtesy of BMW OF NORTH AMERICA, INC.

If applicable, remove balance weights.

Check LATERAL RUNOUT of rim with special tool 36 1 030 (measuring fixture).

Fig 3: Checking Wheel Lateral Runout Using Special Tool (36 1 030)

G04767182

Courtesy of BMW OF NORTH AMERICA, INC.

Check RADIAL RUNOUT of rim with special tool 36 1 030 (measuring fixture).

Fig 4: Checking Wheel Radial Runout Using Special Tool (36 1 030)

G04767183

Courtesy of BMW OF NORTH AMERICA, INC.