35 40 001 Removing And Installing/Replacing Accelerator Pedal Module

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew screw.

Pull accelerator pedal module upwards out of fixture.

Installation:

Tightening torque: 35 40 1AZ . See PEDALS for specs.

Fig 1: Pulling Accelerator Pedal Module

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off plug (1).

Remove accelerator pedal module.

Fig 2: Identifying Plug

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Accelerator pedal module can only be replaced completely with adapter plate.