34 32 881 Replacing Front Left or Right Brake Hoses
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Observe safety when raising the vehicle.
After completing tasks, bleed brake system. See 34 00 025 REPLACING FLUID IN ABS/ASC+T BRAKE SYSTEM
Apply pedal prop and depress brake pedal slightly. This prevents brake fluid from emerging from the expansion tank when the brake lines are opened.
Disconnect brake hose from pipe.
Unfasten brake hose from brake caliper.
IMPORTANT:
Grip brake hose at square head so that connecting piece cannot turn in retaining bracket.
Installation:
First tighten brake hose on brake caliper.
Tightening torque 34 32 4AZ. See 34 32 BRAKE LINES
Move wheels into straight-ahead position.
Insert brake hose in bracket and screw onto brake pipe.
Tightening torque 34 32 1AZ. See 34 32 BRAKE LINES
IMPORTANT:
Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.