33 55 040 Replacing Stabilizer Link For Rear Left Or Right Stabilizer

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Observe safety when raising the vehicle.

Release nut; if necessary, grip brace at Torx socket.

Installation:

Replace self-locking nut.

Tightening torque 33 55 2AZ . See REAR AXLE - TIGHTENING TORQUES .

Fig 1: Locating Self-Locking Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut; if necessary, grip brace at Torx socket.

Remove stabilizer link.

Installation:

Replace self-locking nut.

Tightening torque 33 55 2AZ . See REAR AXLE - TIGHTENING TORQUES .

Fig 2: Locating Stabilizer Link

Courtesy of BMW OF NORTH AMERICA, INC.