LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1225 (Front Axle - Repair Instructions) >> 10 Front Axle Suspension >> 51 47 491 Removing And Installing/Replacing Rear Underbody Protection >> Underbody protection, petrol/gasoline engines

Underbody protection, petrol/gasoline engines

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Remove underbody protection (2) towards rear.

Installation: 

Centre underbody protection (2) and tighten down screws (1).

Fig 1: Identifying Underbody Protection Screws
G04766713Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Release screws (1).

Remove heat shield (2).

Fig 2: Identifying Heat Shield Screws
G04766714Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals