LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1223 (Automatic Transmission - Repair Instructions) >> 00 Transmission Assembly >> 23 .. Universal Transmission Bracket

23 .. Universal Transmission Bracket

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE:
  • The universal transmission bracket is introduced for the E60 AWD
  • Suitable for manual and automatic transmissions
IMPORTANT:

Front and rear supports (1) can be laterally adjusted by means of screws (2).

Carrier (3) of rear supports (1) can be longitudinally adjusted by means of screw.

Supports must be adapted in length and width to the transmission.

Fig 1: Identifying Front & Rear Supports Screws
G04725989Courtesy of BMW OF NORTH AMERICA, INC.

Supporting transmission: 

Support transmission with special tools 23 4 050, 23 0 132, 00 2 030. 

IMPORTANT: Transmission must be secured with tensioning strap (1).
Fig 2: Identifying Special Tool (23 4 150), (23 0 132) & (00 2 030)
G04725990Courtesy of BMW OF NORTH AMERICA, INC.