LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1218 (Engine Electrical System -- Torque Specifications (N54)) >> 42 Starter Lead >> 12 42 Starter Line

12 42 Starter Line

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
STARTER LINE TIGHTENING SPECIFICATION

- Type Thread Tightening specification Measure
1AZ Assembly, starter motor/alternator cable to alternator N54 M8 - 19 Nm
2AZ Starter motor/alternator cable to starter motor N54 M8 - 13 Nm
3AZ Starter motor/alternator cable to jump-start connection point N54 M8 Flange nut 19 Nm
- N54 M8 x 14 Hexagon screw 8.8 ZNS3 19 Nm
- N54 M8 Hexagon screw with ISA 15 Nm
4AZ Ground cable to engine support arm/engine carrier N54 M8 - 19 Nm
5AZ Ground cable to longitudinal member N54 M8 - 19 Nm
6AZ Ground rail to longitudinal member N54 M8 - 19 Nm
7AZ Bracket to crankcase N54 M8 x 16 - 19 Nm