LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1217 (Fuel System -- Tightening Torque (N54)) >> 62 Sensor for Control Unit >> 13 62 Senders for Control Unit

13 62 Senders for Control Unit

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
SENDERS FOR CONTROL UNIT SPECIFICATION

- Type Thread Tightening specification Measure
1AZ Temperature time switch M21/M51 - - 18 Nm
2AZ Coolant temperature sensor M60/1/M60/2/M21/M51 - - 18 Nm
- All others - - 13 Nm
3AZ Temperature switch All - - 28 Nm
4AZ Temperature sensor - air All - - 13 Nm
5AZ Charge-air pressure sensor on holder M51/M41 - - 4 Nm
Charge-air pressure sensor on intake manifold M47 - - 5 Nm
6AZ Twin temperature sensor (4-pin plug-in connection) M41/M43/M44/S50/S52/M52/M57/M67/M62/M73 - - 13 Nm
7AZ Air-mass sensor on lower section of air filter housing M51 - - 3.5 Nm
Air-mass flow sensor to cylinder head cover M47/M47TU/M57/M57TU - - 4.5 Nm
8AZ Pulse generator, camshaft to cylinder head cover M57 - - 4.5 Nm
- M47TU/M57TU - - 3.5 Nm
9AZ Intake neck on air-mass flow sensor M47 - - 9 Nm


SENDERS FOR CONTROL UNIT SPECIFICATION

- Type Thread Tightening specification Measure
1AZ Coolant temperature sensor N54 M12x1.5 - 13.5 Nm
2AZ Intake pressure sensor N54 K50x18 - 3.5 Nm