LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1207 (Steering And Wheel Alignment -- Service Techniques) >> 32 Steering And Wheel Alignment >> 4. Workstation >> 4.3 Measuring Tolerance

4.3 Measuring Tolerance

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

All measuring tolerances are system tolerances. This means that the sum of all individual tolerances gives the value shown in the example. Example of camber: Quick-acting clamp + measuring sensor + computer = 1' at a measuring range of ± 3° (all BMW vehicles are within this measuring range).

scientia non olet · About LEMON Manuals