3.7 BMW Quick-Acting Clamp

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

BMW quick-acting clamp for holding the measuring sensors precisely in position and measuring without rim run-out compensation.
NOTE: Any existing quick-acting clamps, e.g. from older F1600s or ML-3000s, must not be used on the BMW KDS.

Fig 1: Identifying BMW Quick-Acting Clamp
Courtesy of BMW OF NORTH AMERICA, INC.