LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1205 (Rear Axle - Torque Specifications) >> Wheel Bearings >> 33 41 Wheel Bearings

33 41 Wheel Bearings

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATION - WHEEL BEARINGS (33 41)

  Type Thread Tightening specification Measure
1AZ Rear axle shaft to drive flange E12, E21, E23, E24 Collar nut yellow chromated Replace collar nut 435 Nm
  E28 Collar nut waxed white M22 Replace collar nut 190 Nm
  E23, E24, E28, E32, E34 Collar nut waxed white M27 Replace collar nut 250 Nm
2AZ Bearing unit on wheel carrier E39   Replace screws  
      Jointing torque 30 Nm
      Torque angle 90 °
  E60   Replace screws  
      Jointing torque 30 Nm
      Torque angle 90 °
  E53, E61, E63, E64, E65, E66     100 Nm
3AZ Drive flange to axle shaft E53, E60, E61, E63, E64, E65, E66, E67 M27 Replacing collar nut and lightly oil contact face 420 Nm
  E31, E36, E38, E39, E46, E52, E83, E85, E86 M27 Replacing collar nut and lightly oil contact face 300 Nm
  E36, E46, E85, E86 M24 Replacing collar nut and lightly oil contact face 250 Nm
  E30, E36 M22 Replacing collar nut and lightly oil contact face 200 Nm