33 55 040 Replacing Stabilizer Links For Stabilizer
WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Release nut (1); if necessary, grip at Torx socket.
Installation:
Replace self-locking nut.
Tightening torque: 33 55 2AZ . See STABILIZER BAR for specs.
Release nut (2); if necessary, grip at Torx socket.
Remove stabilizer link.
Installation:
Replace self-locking nut.
Tightening torque: 33 55 2AZ . See STABILIZER BAR for specs.