LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1197 (Rear Axle - Repair) >> 11 Final Drive With Cover >> 33 11 ... Replacing Rear Cover Gasket On Rear Differential (188K)

33 11 ... Replacing Rear Cover Gasket On Rear Differential (188K)

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:

To avoid leaks from the rear differential cover, do not use a paper gasket in cars with liquid gaskets!

To prevent the differential oil from foaming over, make sure that no remnants of the liquid gasket are pressed into the rear differential housing.

Release screws (1).

Tightening torque (M10x75) 33 11 1AZ  . See REAR DIFFERENTIAL CASE WITH COVER for specs.

Unscrew screws (2).

Tightening torque (M10x25) 33 11 1AZ  . See REAR DIFFERENTIAL CASE WITH COVER for specs.

Remove cover.

If necessary, remove remnants of liquid gasket with scraper.

Clean sealing face on cover and rear differential.

Installation: 

If a paper gasket was fitted, a paper or liquid gasket can be used.

Fig 1: Identifying Rear Cover Gasket On Rear Differential Screws (188K)
G04759762Courtesy of BMW OF NORTH AMERICA, INC.