25 11 071 Replacing Knob For Shift Lever

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not twist knob during removal as this would cause the turning lock in the knob to shear off.

Tug firmly to remove knob.

Installation:

Fit knob on selector lever, align and press on until it snaps noticeably into place.

NOTE: Illustration shows E46.

Fig 1: Removing Selector Lever Knob

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Push rubber gaiter (1) down until groove (2) is fully exposed.

Fig 2: Identifying Rubber Gaiter In Groove

Courtesy of BMW OF NORTH AMERICA, INC.